Keeping your PC running in top condition is about more than clearing up space or looking for memory hogging programs that have run astray. Processors can overheat and are tricky in smaller builds, but if you have the best low profile CPU cooler in your system, you’ll never have to sweat a meltdown.
Our Top Picks
[amazon box=”B009VCAJ7W,B00VGDN6F6,B01MCT9V18,B07MDXVLCZ,B0177GTV9U,B079K11GNB,B07HJ198TB” template=”table”]
When your case is cramped, you’re going to need something a bit more svelte than your typical CPU cooler. That’s where low profile designs come into play, and we’ve found several that are standouts if you’re looking to take the temperature down a few notches in your PC.
Choosing the Right Cooler for the Job
Before we get to the best of the bunch, we’re going to go over a few areas in case this is your first aftermarket CPU fan. We aren’t going to cover installation, but our guide will help you find the perfect cooling solution for your processor.
CPU Cooler Style
Unlike the wild world of GPU coolers, there are two styles of CPU coolers for the most part with Liquid CPU coolers and Air-based systems. Both will get the job done, but liquid tends to be the more popular option when it comes to the best low profile CPU cooler for overclocking. A good air cooler can be just as effective however and is considerably cheaper. We’re just going to cover fan and radiator-based air coolers this time around, but this will explain the differences between the two quite nicely.
It doesn’t matter if you’ve got your eye set on an RGB CPU cooler or just want something simple – compatibility is critical. This is one area where things are clear-cut considering the specs you need to know are readily available. If you’re in a rush, be sure to check out the TDP rating along with the height and overall dimensions of the cooler.
With low-profile coolers, height is an obvious stat to keep in mind, and something we’ll list with all of our choices below. While it has nothing to do with compatibility, you’ll want to consider the decibel level as well. Some fans are considerably quieter than others…
Warranties are always important when it comes to PC components although it’s an overlooked area with CPU coolers. They can vary from a couple of years to close to a decade although price often dictates the warranty length.
7 Best Low-Profile CPU Coolers
A Quiet and Efficient CPU Cooler
Noctua is one of the leaders when it comes to PC cooling tech, so it’s no surprise they found themselves on our list. The NH-L9i is a low-profile cooler that fits a variety of builds and ideal if you want a powerful solution for your PC.
The Noctua NH-L9i is an air-based cooler built to work with smaller systems where space is tight. It’s only 37mm high with the fan attached, weighs 420 grams and measures 95mm wide by 95mm deep. It won’t take up much space in your case, and it’s one of the quieter models around if you use the Low-Noise Adapter which can drop things down to 14.8 dBA.
This CPU fan comes with the SecuFirm2 mounting kit and is outfitted with the company’s NT-H1 thermal compound. It’s compatible with Intel sockets LGA1150, LGA1151, LGA1155 and LGA1156 and sports a 6-year warranty as well although you’ll want to refer to their compatibility list. This one’s only for Intel machines, but if you rock an AMD chip, the NH-L9a has you covered.
- Very quiet fan
- 600 – 2,500 RPM
- 39mm high
- 420 grams
- The price tag
- Not for overclocking
be quiet! BK002 Shadow Rock
When Silence is Golden
Whenever a company uses the word “Quiet” in their moniker, they need to be able to produce a product that lives up the type. We’re pleased to say the minds at be quiet! have delivered with the Shadow Rock LP, the quietest cooler to make the cut.
While this CPU cooler has a similar design to the rest of the pack, its performance sets it apart. Well, that and the noise level. At full speed, it’s rated at 25.5 dBA which is impressive, and the 120mm Pure Wings 2 PWM fan will definitely keep things cool. It gets some help from a sturdy heatsink as well which has 54 aluminum fins on the top and 32 on the bottom. The be quiet! Shadow Rock LP measures 134mm x 122mm x 75.4mm unmounted with a weight of 390 grams.
This cooler is a little taller than others but twice as quiet and that 1,500 RPM fan has a lifespan of 80,000 hours to boot. The be quiet! BK002 comes with a 3-year warranty and is a compatible with AMD sockets AM2(+), AM3(+), AM4(+), FM1, and FM2(+). As for Intel, we have the 775 / 115X / 1366 and LGA2011.
- Its super quiet
- 130w TDP
- Intel & AMD
- Build quality
- Mounting brackets could be better
- Can be tricky to install
Thermaltake Engine 27 1U Low Profile Cooler
A Tiny, Yet Powerful Low Profile Cooler
If you felt Noctua’s cooler was a little bland, the Engine 27 1U may be more your speed. It has a unique design that will grab your attention and has one of the lowest profiles we’ve found if you have an Intel-based machine.
This aluminum beauty is designed for optimum performance in HTPC, POS terminals and mini PCs. The all-metal design includes a copper base with nickel plating which provides excellent heat dissipation when combined with the 40 blade PWM fan. That fan is capable of hitting speeds between 1,500 – 2,500 RPM and has a decibel rating of 13 – 25 dBA.
The Thermaltake Engine 27 1U is compatible with 70W chips and the usual Intel sockets with the LGA 1150, 1151, 1155, and 1156. It has a lifespan of 50,000 hours and is lightweight at only 310 grams. While it is expensive, it will look great in your case and performs as advertised.
- Only 27mm high
- Eye-catching design
- Nickel-plated copper base
- 60mm PWM fan
- Intel only
- Installation can be tricky
Scythe Big Shuriken 3
5 Heatpipe Heatsink Beast
Scythe Big Shuriken 3 comes with a low profile layout that can be used on Small Form Factor PC (Mini ITX, HTPC). It’s also 9mm higher than the previous version.
It is fully compatible with Mini ITX and Micro ATX motherboards because it has pretty asymmetric and offset design.
With it comes Kaze Flex 120 slim fan, which is 15mm high. It uses Sealed Precision Fluid Dynamic Bearing, which allows this cooler to last much longer, up to 120,000 hours (MTTF) and helps it to operate quietly, along with rubber pads on corners that help reduce vibration.
Scythe Big Shuriken 3 is equipped with HPMS III spring-loaded mounting system, which is very easy to set up properly, while also being very secure.
It supports a wide range of processors, such as Intel LGA 775/1150/1151/1155/1156, 1366, 2011 (V3) Square ILM, 2066 & AMD AM2(+), AM3(+), AM4, FM1, FM2(+).
Apart from that, it is considered to be a premium model for Intel Core i9, i7, i5, i3, and AMD Ryzen processor types.
- Very quiet performance
- Compatible with a lot of processor types
- Lasts up to 120,000 hours, thanks to Sealed Precision Fluid Dynamic Bearing
- Kaze Flex 120 slim fan + standard 25mm fan for greater performance
- Easy to set up with HPMS III spring-loaded mounting system
- Can require 2nd boot if it shows CPU Fan Error
A Compact Cooler for AMD and Intel Machines
Interested in a cooler that’s compact but follows the zero interference rule? Well, Cryorig may have the solution for your build with the C7 CPU cooler. It’s designed to steer clear of PCI-E and RAM while keeping your AMD or Intel processor nice and cool.
The Cyrorig C7 is one of the shorter coolers on our list with a height of 47mm from top to bottom. At 97mm x 97mm, it won’t take up much room, and the mounting kit is nice although you do have to flip the motherboard over for the backplate which can be easier said than done. The 57 fin heatsink is nickel plated with a copper base and four premium pipes while the PWM fan can hit speeds between 600 – 2,500 RPM.
This is another cooler that performs as advertised and can handle a wide range of boards with a TDP of 100w. If you have an Intel system, you’re good to go with the 1150, 1151, 1155, and 1156. AMD users are included as well with the FM1, FM2/+, Am2/+, AM3/+, and AM4. The C7 is covered for 3-years and provides a good value for the price.
- Only 47mm tall
- Compatible with AMD and Intel sockets
- 100 TDP
- No interference design
- Noisier than other models
Cooler Master MasterAir G100M
The Best RGB Low Profile Cooler
Fan-based CPU coolers aren’t usually too sassy, especially compared to liquid systems or GPU coolers. The MasterAir G100M from Cooler Master is an exception to that rule, and a colorful option if you’re looking for something with a little more flair.
If you’ve got one of the best CPUs for gaming, you may want a slick looking fan to keep it cool. The G100M fits that bill with its RGB LED system which has several patterns like Mirage and Stars. The company took a top-down approach to cooling with a 92mm PWM fan with speeds between 600 – 2,400 RPM. The decibel level is listed at 30 dBA at max speed, and you won’t need an RGB board as this one comes with a handy remote.
You’ll want to take the term low-profile loosely with this one considering its 75mm high which is twice the size of some options. That said, it’s still an excellent choice and more compatible than other options. For Intel, it works with the LGA 2066, 2011-23, 2011, 1151, 1150, 1155, 1156, 1466 and 776 sockets. AMD users are locked in with the FM1, FM2/+, AM2/+, AM3/+, and AM4. This cooler comes with a 2-year warranty.
- 130w TDP
- Wired RGB controller
- Copper heat column
- Sweet price point
- Could be too big for some builds
- The controller is a bit chintzy
ARCTIC Alpine 12
The Best Budget CPU Cooler
While CPU coolers aren’t what most people would consider expensive compared to other components, some are definitely more affordable than others. The ARCTIC Alpine 12 falls into that category with a budget-friendly price tag and simple, but effective cooling.
This cooler is easy to install compared to other alternatives thanks to a push pin design which means “tool-free” installation. MX-2 has been pre-applied as well, and the radial heatsink design is said to increase cooling capacity considerably. The fan is 92mm with RPWM controls and a range of 100 – 2,000 RPM. There’s also a 0db fan mode below 5% PWM if you prefer to keep your build super silent.
The biggest draw of this cooler is the price tag although we like the 95w TDP rating and the fact it’s easy to install as well. It’s not the smallest cooler at 95mm x 95mm x 77mm but is very light at 270 grams and very affordable. You’re out of luck with an AMD board, but ready to rock if you have an Intel 1150, 1151, 1155, or 1156 socket.
- Great price point
- 95w TDP
- 0dBA mode
- Easy to install
- Not AMD friendly
- Build quality
Whether you have a Mini ITX, Micro ATX or simply want a cooler for your HTPC system, the best low profile CPU cooler is only a click away. Remember to keep your buying guide in mind if you become stuck between models and think ahead when it comes to the thermal design power.